2018 Model, 260320012102218
3 Month Warranty
it was a in-house unit before then sent out as rental unit, with some scratches & rust-paint touched-up, manifold comes with tri-clamp & union patente fittings
Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
Manual Pressure Control Valve for 0 to 80 psi is an optional add-on, not standard with every unit
Specifications
|
Specifications
Model
|
WAC-1 |
| Input power |
110 VAC 60 Hz single-phase (1PH) 1460 watts
|
| Nominal cooling capacity |
1935 kcal/h
10°C, cooling capacity 2300W
15°C, cooling capacity 2750W
Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 12°C
Outlet chilled fluid temperature: 7°C
Inlet cooling air temperature: 30°C
Outlet cooling air temperature: 35°C
|
| Compressor |
Make: Panasonic, UL Listed
Power: 110VAC 60Hz 1-PH, LRA42, thermally protected
Refrigerant: R410A (800g)
Number of compressor installed: one
|
| Water pump |
Make: LX (CMFL2-20-A-W-G-BABE)
Power: 110VAC 60Hz 1-PH 370 watts 3.7A 3450 rpm IP55
Flow rate: 528 gallons per hour
Max pressure: 10 bar. H(max); 20.5m, H(n): 16m |
| Reservoir volume |
4.5 gallons |
| Cooling fan |
Make: Kunli (YWF A2S-300S-5DIIIA05)
Power: 110VAC 60Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44
Flow rate: 70,000 cu ft per hour
Number of fan installed: one |
| Temperature accuracy |
+/- 2 °C |
| Recommended coolant |
Distilled water |
Water inlet & outlet on chiller
|
1.5" tri clamp flange
|
| Manifold |
Inlet: 1.5" tri clamp flange with silicon gasket and clamp, outlet: 8mm quick connect with ball valve
|
| Unit/shipping weight |
200 Lb / 260 Lb
|
| Unit/shipping dimensions |
29 x 17 x 35" / 36 x 21 x 42" (DxWxH)
|
| Safety |
Over current and compressor thermal protection |
| Working environment |
Temperature range of chilled fluid: 5°C - 35°C
Temperature difference of chilled fluid between inlet
and outlet: 3°C - 8°C. It is better to use the chiller while
the ambient temperature at or below 35°C
|
| Compatiable Ai induction heaters |
High frequency 4kW, 6.6kW
Mid frequency 15kW, 25kW
Low frequency 15kW |
| CE compliant |
Yes |
| Warranty |
One Year |
|
Standard Packages
|
Standard package
Item
|
Quantity |
Image |
WAC-1 recirculating chiller
|
1 pc
|
|
Water manifold
|
2 pcs
|
|
| KF40 clamp |
2 pcs |
|
Users manual
|
1 pc
|
|
|
